SP & SP-E flush mounted roller shutters

Flush-mounted systems are mainly designed for new buildings. However, once the necessary modifications to the lintel are made, these products can also be installed in existing buildings.

Categories: ,
Flush-mounted systems are mainly designed for new buildings. However, once the necessary modifications to the lintel are made, these products can also be installed in existing buildings. It is important to plan the use of such solutions, this also applies to the installation method, as early as at the building design stage to allow for the effective use of the product’s functional values. Flush-mounted systems bring excellent thermal insulation performance as they do not require any modifications to the existing windows, doors or lintels, and thus do not affect the building’s energy use. What’s more, they perfectly fit the building’s façade and form an integral part thereof.The front section of the roller-box is equally a basis for any finishing material (plaster, clinker, etc.) so that it remains an unnoticed element of the façade. Aluprof’s SP and SP-E systems are designed to ensure, first and foremost, a good protection against heat loss. This was especially appreciated by the Passive House Institute in Darmstadt (PHI), and the organization has issued a recommendation to apply both these solutions for 165 mm boxes (and smaller) in passive buildings. But it’s the proper installation in a previously insulated lintel in accordance with manufacturer’s guidelines that is an essential condition here. In addition, window joinery should comply with the appropriate parameters, i.e. heat transfer coefficient of the window Uw is lower than 0.80/(m²K) while the glass pane coefficient Ug does not exceed 0.70 W/(m²K).

An additional advantage of the flush-mounted roller shutters is the ability to apply an independently-working insect screen to protect the interior from insects. As it is the case for front-mounted systems, the roller’s curtain can be made of foam-filled, plastic or extruded profiles.

Download information

SP flush mounted roller shutter ( 7.21 MB)
SP-E flush mounted roller shutter ( 1.28 MB)

Related products

Profiles

PA 45 aluminium shutter profile filled with CFC-free foam

The PA 45 is designed for use in window roller shutters, door recesses, and small shopfronts.

Roller shutters

s_onro curtain

Striving to be one step ahead of our Customers expectations Aluprof S.A. offers s_onro ® system which combines blinds and roller shutters in a single system.

Drives

Drives

We offer a full range of accessories necessary for the fabrication of roller shutters and garage doors.

Profiles

PE 55 aluminium profile extruded

The PE 55 extruded profile is recommended for use in facilities where security issues and aesthetics come first. The profile has been designed to have very good strength properties.

Profiles

PA 40 aluminium shutter profile filled with CFC-free foam

The PA 40 is designed for use in window roller shutters, door recesses, and small shopfronts. These profiles are of better technical performance and are thus more stable.

Roller shutters

SK, SKE & SKP front mounted roller shutters

SK, SKE and SKP system-based roller shutters are intended for use in existing buildings. The advantage of these products is that they do not require any special pre-installation preparation nor works to the existing structure as they are not integrated with the window. Buyers can thus decide to install the front-mounted roller shutters at any [...]

Profiles

PEK 52 aluminium profile grille

The PEK 52 profile is intended for use in small-size roll-up grilles in stores, malls, banks and other facilities while safe display is still possible.

Profiles

PA 39 aluminium shutter profile filled with CFC-free foam

The PA 39 is one of the most popular aluminium profiles.